HashiConf 2024 Now streaming live from Boston! Attend for free
Consul
Consul Home

You are viewing documentation for version v1.13.x. View latest version.

Upgrades

This topic describes how to upgrade Consul API Gateway.

Upgrade to v0.4.0

Consul API Gateway v0.4.0 adds support for Gateway API v0.5.0 and the following resources:

  • The graduated v1beta1 GatewayClass, Gateway and HTTPRoute resources.

  • The ReferenceGrant resource, which replaces the identical ReferencePolicy resource.

Consul API Gateway v0.4.0 is backward-compatible with existing ReferencePolicy resources, but we will remove support for ReferencePolicy resources in a future release. We recommend that you migrate to ReferenceGrant after upgrading.

Requirements

Ensure that the following requirements are met prior to upgrading:

  • Consul API Gateway should be running version v0.3.0.

Procedure

  1. Complete the standard upgrade.

  2. After completing the upgrade, complete the post-upgrade configuration changes. The post-upgrade procedure describes how to replace your ReferencePolicy resources with ReferenceGrant resources and how to upgrade your GatewayClass, Gateway, and HTTPRoute resources from v1alpha2 to v1beta1.

Post-upgrade configuration changes

Complete the following steps after performing standard upgrade procedure.

Requirements

  • Consul API Gateway should be running version v0.4.0.
  • Consul Helm chart should be v0.47.0 or later.
  • You should have the ability to run kubectl CLI commands.
  • kubectl should be configured to point to the cluster containing the installation you are upgrading.
  • You should have the following permissions for your Kubernetes cluster:

Procedure

  1. Verify the current version of the consul-api-gateway-controller Deployment:

    $ kubectl get deployment --namespace consul consul-api-gateway-controller --output=jsonpath="{@.spec.template.spec.containers[?(@.name=='api-gateway-controller')].image}"

    You should receive a response similar to the following:

    "hashicorp/consul-api-gateway:0.4.0"

  2. Issue the following command to get all ReferencePolicy resources across all namespaces.

    $ kubectl get referencepolicy --all-namespaces

    If you have any active ReferencePolicy resources, you will receive output similar to the response below.

    Warning: ReferencePolicy has been renamed to ReferenceGrant. ReferencePolicy will be removed in v0.6.0 in favor of the identical ReferenceGrant resource.
NAMESPACE   NAME
default     example-reference-policy

    If your output is empty, upgrade your GatewayClass, Gateway and HTTPRoute resources to v1beta1 as described in step 7.

  3. For each ReferencePolicy in the source YAML files, change the kind field to ReferenceGrant. You can optionally update the metadata.name field or filename if they include the term "policy". In the following example, the kind and metadata.name fields and filename have been changed to reflect the new resource. Note that updating the kind field prevents you from using the kubectl edit command to edit the remote state directly.

    referencegrant.yaml

    apiVersion: gateway.networking.k8s.io/v1alpha2
kind: ReferenceGrant
metadata:
  name: reference-grant
  namespace: web-namespace
spec:
  from:
  - group: gateway.networking.k8s.io
    kind: HTTPRoute
    namespace: example-namesapce
  to:
  - group: ""
    kind: Service
    name: web-backend

  4. For each file, apply the updated YAML to your cluster to create a new ReferenceGrant resource.

    $ kubectl apply --filename <file>

  5. Check to confirm that each new ReferenceGrant was created successfully.

    $ kubectl get referencegrant <name> --namespace <namespace>
NAME
example-reference-grant

  6. Finally, delete each corresponding old ReferencePolicy resource. Because replacement ReferenceGrant resources have already been created, there should be no interruption in the availability of any referenced Service or Secret.

    $ kubectl delete referencepolicy <name> --namespace <namespace>
Warning: ReferencePolicy has been renamed to ReferenceGrant. ReferencePolicy will be removed in v0.6.0 in favor of the identical ReferenceGrant resource.
referencepolicy.gateway.networking.k8s.io "example-reference-policy" deleted

  7. For each GatewayClass, Gateway, and HTTPRoute in the source YAML, update the apiVersion field to gateway.networking.k8s.io/v1beta1. Note that updating the apiVersion field prevents you from using the kubectl edit command to edit the remote state directly.

    apiVersion: gateway.networking.k8s.io/v1beta1
kind: Gateway
metadata:
  name: example-gateway
  namespace: gateway-namespace
spec:
  ...

  8. For each file, apply the updated YAML to your cluster to update the existing GatewayClass, Gateway or HTTPRoute resources.

    $ kubectl apply --filename <file>
gateway.gateway.networking.k8s.io/example-gateway configured

Upgrade to v0.3.0 from v0.2.0 or lower

Consul API Gateway v0.3.0 introduces a change for people upgrading from lower versions. Gateways with listeners with a certificateRef defined in a different namespace now require a ReferencePolicy that explicitly allows Gateways from the gateway's namespace to use certificateRef in the certificateRef's namespace.

Requirements

Ensure that the following requirements are met prior to upgrading:

  • Consul API Gateway should be running version v0.2.1 or lower.
  • You should have the ability to run kubectl CLI commands.
  • kubectl should be configured to point to the cluster containing the installation you are upgrading.
  • You should have the following permission rights on your Kubernetes cluster:
  • (Optional) The jq command line processor for JSON can be installed, which will ease gateway retrieval during the upgrade process.

Procedure

  1. Verify the current version of the consul-api-gateway-controller Deployment:

    $ kubectl get deployment --namespace consul consul-api-gateway-controller --output=jsonpath="{@.spec.template.spec.containers[?(@.name=='api-gateway-controller')].image}"

    You should receive a response similar to the following:

    "hashicorp/consul-api-gateway:0.2.1"

  2. Retrieve all gateways that have a certificateRefs in a different namespace. If you have installed the jq utility, you can skip to step 4. Otherwise, issue the following command to get all Gateways across all namespaces:

    $ kubectl get Gateway --output json --all-namespaces

    If you have any active Gateways, you will receive output similar to the following response. The output has been truncated to show only relevant fields:

    apiVersion: gateway.networking.k8s.io/v1alpha2
kind: Gateway
metadata:
  name: example-gateway
  namespace: gateway-namespace
spec:
  gatewayClassName: "consul-api-gateway"
  listeners:
    - name: https
      port: 443
      protocol: HTTPS
      allowedRoutes:
        namespaces:
          from: All
      tls:
        certificateRefs:
          - group: ""
            kind: Secret
            name: example-certificate
            namespace: certificate-namespace

  3. Inspect the certificateRefs entries for each of the routes.

    If a namespace field is not defined in the certificateRefs or if the namespace matches the namespace of the parent Gateway, then no additional action is required for the certificateRefs. Otherwise, note the namespace field values for certificateRefs configurations with a namespace field that do not match the namespace of the parent Gateway. You must also note the namespace of the parent gateway. You will need these to create a ReferencePolicy that explicitly allows each cross-namespace certificateRefs-to-gateway pair. (see step 5).

    After completing this step, you will have a list of all secrets similar to the following:

      example-certificate:
    - namespace: certificate-namespace
      parentNamespace: gateway-namespace

    Proceed with the standard-upgrade if your list is empty.

  4. If you have installed jq, issue the following command to get all Gateways and filter for secrets that require a ReferencePolicy.

    
$ kubectl get Gateway -o json -A | jq -r '.items[] | {gateway_name: .metadata.name, gateway_namespace: .metadata.namespace, kind: .kind, crossNamespaceSecrets: ( .metadata.namespace as $parentnamespace | .spec.listeners[] | select(has("tls")) | .tls.certificateRefs[] | select(.namespace != null and .namespace != $parentnamespace )  )} '

    The output will resemble the following response if gateways that require a new ReferencePolicy are returned:

    {
  "gateway_name": "example-gateway",
  "gateway_namespace": "gateway-namespace",
  "kind": "Gateway",
  "crossNamespaceSecrets": {
    "group": "",
    "kind": "Secret",
    "name": "cexample-certificate",
    "namespace": "certificate-namespace"
  }
}

    If your output is empty, proceed with the standard-upgrade.

  5. Using the list of secrets you created earlier as a guide, create a ReferencePolicy to allow each gateway cross namespace secret access. The ReferencePolicy explicitly allows each cross-namespace gateway to secret pair. The ReferencePolicy must be created in the same namespace as the certificateRefs.

    Skip to the next step if you've already created a ReferencePolicy.

    The following example ReferencePolicy enables example-gateway in gateway-namespace to utilize certificateRefs in the certificate-namespace namespace:

    referencepolicy.yaml

    apiVersion: gateway.networking.k8s.io/v1alpha2
kind: ReferencePolicy
metadata:
  name: reference-policy
  namespace: certificate-namespace
spec:
  from:
    - group: gateway.networking.k8s.io
      kind: Gateway
      namespace: gateway-namespace
  to:
    - group: ""
      kind: Secret

  6. If you have already created a ReferencePolicy, modify it to allow your gateway to access your certificateRef and save it as referencepolicy.yaml. Note that each ReferencePolicy only supports one to field and one from field (refer the ReferencePolicy documentation). As a result, you may need to create multiple ReferencePolicys.

  7. Issue the following command to apply it to your cluster:

    $ kubectl apply --filename referencepolicy.yaml

    Repeat this step as needed until each of your cross-namespace certificateRefs have a corresponding ReferencePolicy.

    Proceed with the standard-upgrade.

Upgrade to v0.2.0

Consul API Gateway v0.2.0 introduces a change for people upgrading from Consul API Gateway v0.1.0. Routes with a backendRef defined in a different namespace now require a ReferencePolicy that explicitly allows traffic from the route's namespace to the backendRef's namespace.

Requirements

Ensure that the following requirements are met prior to upgrading:

  • Consul API Gateway should be running version v0.1.0.
  • You should have the ability to run kubectl CLI commands.
  • kubectl should be configured to point to the cluster containing the installation you are upgrading.
  • You should have the following permission rights on your Kubernetes cluster:
  • (Optional) The jq command line processor for JSON can be installed, which will ease route retrieval during the upgrade process.

Procedure

  1. Verify the current version of the consul-api-gateway-controller Deployment:

    $ kubectl get deployment --namespace consul consul-api-gateway-controller --output=jsonpath= "{@.spec.template.spec.containers[?(@.name=='api-gateway-controller')].image}"

    You should receive the following response:

    "hashicorp/consul-api-gateway:0.1.0"

  2. Retrieve all routes that have a backend in a different namespace. If you have installed the jq utility, you can skip to step 4. Otherwise, issue the following command to get all HTTPRoutes and TCPRoutes across all namespaces:

    $ kubectl get HTTPRoute,TCPRoute --output json --all-namespaces

    Note that the command only retrieves HTTPRoutes and TCPRoutes. TLSRoutes and UDPRoutes are not supported in v0.1.0.

    If you have any active HTTPRoutes or TCPRoutes, you will receive output similar to the following response. The output has been truncated to show only relevant fields:

      apiVersion: v1
  items:
  - apiVersion: gateway.networking.k8s.io/v1alpha2
    kind: HTTPRoute
    metadata:
      name: example-http-route,
      namespace: example-namespace,
      ...
    spec:
      parentRefs:
      - group: gateway.networking.k8s.io
        kind: Gateway
        name: gateway
        namespace: gw-ns
      rules:
      - backendRefs:
        - group: ""
          kind: Service
          name: web-backend
          namespace: gateway-namespace
          ...
        ...
  - apiVersion: gateway.networking.k8s.io/v1alpha2
    kind: TCPRoute
    metadata:
      name: example-tcp-route,
      namespace: a-different-namespace,
      ...
    spec:
      parentRefs:
      - group: gateway.networking.k8s.io
        kind: Gateway
        name: gateway
        namespace: gateway-namespace
      rules:
      - backendRefs:
        - group: ""
          kind: Service
          name: web-backend
          namespace: gateway-namespace
          ...
    ...

  3. Inspect the backendRefs entries for each of the routes.

    If a namespace field is not defined in the backendRef or if the namespace matches the namespace of the route, then no additional action is required for the backendRef. Otherwise, note the group, kind, name, and namespace field values for backendRef configurations that have a namespace defined that do not match the namespace of the parent route. You must also note the kind and namespace of the parent route. You will need these to create a ReferencePolicy that explicitly allows each cross-namespace route-to-service pair (see step 5).

    After completing this step, you will have a list of all routes similar to the following:

      example-http-route:
    - namespace: example-namespace
      kind: HTTPRoute
      backendReferences:
        - group : ""
          kind: Service
          name: web-backend
          namespace: gateway-namespace

  example-tcp-route:
    - namespace: a-different-namespace
      kind: HTTPRoute
      backendReferences:
        - group : ""
          kind: Service
          name: web-backend
          namespace: gateway-namespace

    Proceed with standard-upgrade if your list is empty.

  4. If you have installed jq, issue the following command to get all HTTPRoutes and TCPRoutes and filter for routes that require a ReferencePolicy.

    $ kubectl get HTTPRoute,TCPRoute -o json -A | jq -r '.items[] | {name: .metadata.name, namespace: .metadata.namespace, kind: .kind, crossNamespaceBackendReferences: ( .metadata.namespace as $parentnamespace | .spec.rules[] .backendRefs[] | select(.namespace != null and .namespace != $parentnamespace )  )} '

    Note that the command retrieves all HTTPRoutes and TCPRoutes. TLSRoutes and UDPRoutes are not supported in v0.1.0.

    The output will resemble the following response if routes that require a new ReferencePolicy are returned:

    {
  "name": "example-http-route",
  "namespace": "example-namespace",
  "kind": "HTTPRoute",
  "crossNamespaceBackendReferences": {
    "group": "",
    "kind": "Service",
    "name": "web-backend",
    "namespace": "gateway-namespace",
    "port": 8080,
    "weight": 1
  }
}
{
  "name": "example-tcp-route",
  "namespace": "a-different-namespace",
  "kind": "TCPRoute",
  "crossNamespaceBackendReferences": {
    "group": "",
    "kind": "Service",
    "name": "web-backend",
    "namespace": "gateway-namespace",
    "port": 8080,
    "weight": 1
  }
}

    If your output is empty, proceed with the standard-upgrade.

  5. Using the list of routes you created earlier as a guide, create a ReferencePolicy to allow cross namespace traffic for each route service pair. The ReferencePolicy explicitly allows each cross-namespace route to service pair. The ReferencePolicy must be created in the same namespace as the backend Service.

    Skip to the next step if you've already created a ReferencePolicy.

    The following example ReferencePolicy enables HTTPRoute traffic from the example-namespace to Kubernetes Services in the web-backend namespace:

    referencepolicy.yaml

    apiVersion: gateway.networking.k8s.io/v1alpha2
kind: ReferencePolicy
metadata:
  name: reference-policy
  namespace: gateway-namespace
spec:
  from:
    - group: gateway.networking.k8s.io
      kind: HTTPRoute
      namespace: example-namespace
  to:
    - group: ""
      kind: Service
      name: web-backend

  6. If you have already created a ReferencePolicy, modify it to allow your route and save it as referencepolicy.yaml. Note that each ReferencePolicy only supports one to field and one from field (refer the ReferencePolicy documentation). As a result, you may need to create multiple ReferencePolicys.

  7. Issue the following command to apply it to your cluster:

    $ kubectl apply --filename referencepolicy.yaml

    Repeat this step as needed until each of your cross-namespace routes have a corresponding ReferencePolicy.

    Proceed with the standard-upgrade.

Standard Upgrade

Note: When you see VERSION in examples of commands or configuration settings, replace VERSION with the version number of the release you are installing, like 0.2.0. If there is a lower case "v" in front of VERSION the version number needs to follow the "v" as is v0.2.0

Requirements

Ensure that the following requirements are met prior to upgrading:

  • You should have the ability to run kubectl CLI commands.
  • kubectl should be configured to point to the cluster containing the installation you are upgrading.

Procedure

This is the upgrade path to use when there are no version specific steps to take.

  1. Issue the following command to install the new version of CRDs into your cluster:

    $ kubectl apply --kustomize="github.com/hashicorp/consul-api-gateway/config/crd?ref=vVERSION"

  2. Update apiGateway.image in values.yaml:

    values.yaml

    ...
apiGateway:
  image: hashicorp/consul-api-gateway:VERSION
  ...

  3. Issue the following command to upgrade your Consul installation:

    $ helm upgrade --values values.yaml --namespace consul --version <NEW_VERSION> <DEPLOYMENT_NAME> hashicorp/consul

    Note that the upgrade will cause the Consul API Gateway controller shut down and restart with the new version.

  4. According to the Kubernetes Gateway API specification, Gateway Class configurations should only be applied to a gateway upon creation. To see the effects on preexisting gateways after upgrading your CRD installation, delete and recreate any gateways by issuing the following commands:

    $ kubectl delete --filename <path_to_gateway_config.yaml>
$ kubectl create --filename <path_to_gateway_config.yaml>

  5. (Optional) Delete and recreate your routes. Note that it may take several minutes for attached routes to reconcile and start reporting bind errors.

    $ kubectl delete --filename <path_to_route_config.yaml>
$ kubectl create --filename <path_to_route_config.yaml>

Post-Upgrade Configuration Changes

No additional configuration changes are required for this upgrade.